This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
STOPGAP F78 is a solvent free, one component, ready to use system which dries rapidly to provide a waterproof surface membrane. STOPGAP F78 impedes the passage of residual construction moisture from affecting subsequent floorcovering installations, therefore allowing early installation of floorcoverings in fast track building programmes.
STOPGAP F78 must be applied in two coats and can be used to isolate residual construction moisture where relative humidity values are up to 95%. It is pigmented blue to allow the user to visually control coverage uniformity.
- Impedes the passage of construction moisture up to 95% RH with a two coat application
- Colour pigmented to aid coverage uniformity
- No priming is required with smoothing compounds
- No mixing required
- Can be resealed and stored for future use
Coverage:
Applications up to 95% RH – 3.3m²/kg as a two coat application
-
ISO 9001
-
ISO 14001
-
ISO 45001
Stopgap F78 Overview Data sheets and Downloads
STOPGAP F78 BASE PREPARATION
It is essential that STOPGAP F78 is applied to a clean and absorbent substrate. Any surface contaminants such as surface hardeners, cement laitance etc., should be removed to produce a slightly textured surface. The surface strength of the substrate should be greater than 1.5 N/mm² in accordance with BS 8204-6 Part 7.2.
Power floated concrete should be mechanically prepared. Bases must contain a structural damp proof membrane. Rough, uneven or damaged concrete or sand/cement screeds must be smoothed/ repaired with STOPGAP 1500, STOPGAP 1200, STOPGAP GREEN BAG/114 or STOPGAP 460. Care must be taken to minimise the occurrence of pinholes in the smoothing compound when pre-smoothing.
It is essential that hygrometer readings in accordance with Appendix A of BS 8203 (Installation of resilient floor coverings) and BS 5325 (Installation of textile floor coverings) are taken and recorded prior to commencing the installation. For further guidance please refer to the F. Ball Subfloor Preparation Guide.
Videos
How to mix and apply Stopgap F78 - High Performance Waterproof Surface Membrane
STOPGAP F78 is a solvent free, one component, ready to use system which dries rapidly to provide a waterproof surface membrane.
STOPGAP F78 impedes the passage of residual construction moisture from affecting subsequent floorcovering installations, therefore allowing early installation of floorcoverings in fast track building programmes.
Need help?
Should you require further information or advice regarding any F. Ball products, please contact the F. Ball technical service team on +44(0)1538 361633 or by e-mail: technical@f-ball.co.uk For the latest information on adhesive recommendations, please refer to the F. Ball Recommended Adhesives Guide