This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
STOPGAP 1600 is a fibre-reinforced smoothing compound designed for new or existing internal floor refurbishments in both domestic and commercial environments, prior to the installation of new floorcoverings.
STOPGAP 1600 is suitable for use over both electrical wired and water-fed underfloor heating and cooling systems.It is fast drying and is ready to receive floorcoverings from as little as 12 hours at 3-5mm thickness.
STOPGAP 1600 is dimensionally stable and is supplied as a pre-blended dry powder,which is designed for application between 3-40mm in one application. It is protein-free which allows it to be used in biologically sensitive areas.
-
Walk on from 3hrs
-
Lay floorcoverings from 12 hrs
-
3mm-40mm application thickness
-
Suitable for under floor heating systems
-
Mix with Water
- Fibre-reinforced
- Use over electric and water-fed underfloor heating systems
- Fast drying
- Protein free
- Suitable for hand or pump application
- Low odour
Coverage:
3.7m² at a thickness of 3mm | 0.7m² at a thickness of 15mm | 0.4m² at a thickness of 25mm | 0.25m² at a thickness of 40mm
-
ISO 9001
-
ISO 14001
-
ISO 45001
-
CE Marking
-
UKCA
-
EC1 PLUS
Stopgap 1600 Overview Data sheets and Downloads
STOPGAP 1600 AREAS OF USE
STOPGAP 1600 is suitable for use over a wide range of absorbent and non-absorbent subfloor types including sand/cement screed, concrete, tile backer boards, plywood, granolithic, terrazzo, epoxy and polyurethane resins, ceramic and quarry tiles and STOPGAP waterproof surface membranes.
Videos
How to mix and apply Stopgap 1600
This video is an instructional videoto assist you in mixing and applying F. Ball Stopgap 1600. STOPGAP 1600 is suitable for use over both electrical wired and water-fed underfloor heating and cooling systems.It is fast drying and is ready to receive floorcoverings from as little as 12 hours at 3-5mm thickness.
Need help?
Should you require further information or advice regarding any F. Ball products, please contact the F. Ball technical service team on +44(0)1538 361633 or by e-mail: technical@f-ball.co.uk For the latest information on adhesive recommendations, please refer to the F. Ball Recommended Adhesives Guide
True pressure sensitive adhesive which dries to a permanently tacky film.