Primers

Stopgap Fill and Prime

Two Component, Flexible Cement Based Primer

Stopgap Fill and Prime
Stopgap Fill and Prime

STOPGAP FILL AND PRIME is a two-component, fast drying flexible cement based primer and has been designed to have a thixotropic consistency which enables joints up to 4mm wide to be filled in raised access panels. Applied up to a thickness of 1mm, STOPGAP FILL AND PRIME sets rapidly and is ready to receive foot traffic in as little as 60 minutes.

Once cured, the flexible nature of the product will accommodate movement within the substrate.

  • Fast drying
  • Application thickness up to 1mm on horizontal surfaces
  • Excellent flexibility
  • Thixotropic to allow filling of joints up to 4mm wide

Coverage:

20m² at a thickness of 0.2mm | 8.5m² at a thickness of 0.5mm

  • SGS System Certification

    ISO 9001

  • SGS System Certification

    ISO 14001

  • SGS System Certification

    ISO 45001

  • EC1 Plus Very Low Emission

    EC1 PLUS

STOPGAP FILL AND PRIME AREAS OF USE

Suitable for use over raised access panels and substrates with well-bonded, waterproof residues of adhesives prior to the direct application of STOPGAP 1200 or STOPGAP 1500. It can also be applied to flooring grade wooden substrates such as plywood, orientated strand board (OSB 3), particle board (chipboard) conforming to BSEN 312 Annex A P4-P7 and medium density fibreboard, prior to the application of STOPGAP 700.

STOPGAP FILL AND PRIME may also be used to smooth out uneven tongue and groove floorboards prior to over boarding with plywood. STOPGAP FILL AND PRIME offers exceptional adhesion to a wide range of other subfloor types including STOPGAP waterproof surface membranes, sand/cement screed, concrete, sound asphalt, granolithic, terrazzo, epoxy and polyurethane resins, ceramic and quarry tiles.

Need help?

Should you require further information or advice regarding any F. Ball products, please contact the F. Ball technical service team on +44(0)1538 361633 or by e-mail: technical@f-ball.co.uk For the latest information on adhesive recommendations, please refer to the F. Ball Recommended Adhesives Guide

You may also be interested in

One component, rapid drying waterproof surface membrane

Fibre-reinforced vinyl and rubber floorcovering adhesive