Primers

Stopgap P131

General Purpose Primer

Stopgap P131 General Purpose Primer
Stopgap P131 General Purpose Primer

STOPGAP P131 is a primer designed to promote the adhesion of STOPGAP smoothing compounds to smooth non-absorbent surfaces. It can also be used as a general purpose primer for absorbent surfaces to promote adhesion and to prevent unacceptably rapid drying of adhesives and smoothing compounds. It is suitable for use in marine applications as part of an IMO system.

It is suitable for use over normal underfloor heating installations. STOPGAP P131 is coloured green to provide the user with visual control of coverage uniformity.

  • General purpose for both absorbent and non-absorbent surfaces
  • Suitable for use with F. Ball marine applications
  • Prevents rapid drying of adhesives and smoothing compounds
  • Pigmented to provide coverage control

Coverage:

Applied dilute to absorbent : 100m² | Applied neat to non-absorbent : 50m²

  • SGS System Certification

    ISO 9001

  • SGS System Certification

    ISO 14001

  • SGS System Certification

    ISO 45001

  • EC1 Plus Very Low Emission

    EC 1 PLUS

  • Marine Wheel

    Marine Approved

  • Marine Ensign

    Marine Approved

STOPGAP P131 AREAS OF USE

STOPGAP P131 should be used on non-absorbent surfaces of STOPGAP waterproof surface membranes, terrazzo, power floated concrete, quarry and ceramic tiles, sound asphalt, epoxy marine primers, well bonded epoxy and polyurethane coatings and minimal existing adhesive residue. It should also be used on absorbent surfaces such as concrete, sand/cement screeds, plywood, hardboard and chipboard.

Videos

How to apply Stopgap P131 - General Purpose Primer

STOPGAP P131 is a primer designed to promote the adhesion of STOPGAP smoothing compound to smooth non-absorbent surfaces. It can also be used as a general purpose primer for absorbent surfaces to promote adhesion and to prevent unacceptably rapid drying of adhesives and smoothing smoothing compounds.

Need help?

Should you require further information or advice regarding any F. Ball products, please contact the F. Ball technical service team on +44(0)1538 361633 or by e-mail: technical@f-ball.co.uk For the latest information on adhesive recommendations, please refer to the F. Ball Recommended Adhesives Guide

You may also be interested in

One component, rapid drying waterproof surface membrane

Fibre-modified smoothing compound for flexible substrates

True pressure sensitive adhesive which dries to a permanently tacky film.