Primers

Stopgap P141

Primer for Non-Absorbent Surfaces

Stopgap P141 Primer
Stopgap P141 Primer

STOPGAP P141 is an acrylic primer designed to promote adhesion and application characteristics of STOPGAP smoothing compounds to non-absorbent subfloors. STOPGAP P141 contains recycled uPVC pulver that dries to a hard, textured surface to enhance bond performance.

  • Textured finish
  • Fast drying
  • Pigmented to provide coverage control
  • Suitable for use with F. Ball marine applications

Coverage:

Applied neat to non-absorbent : 65m²

  • SGS System Certification

    ISO 9001

  • SGS System Certification

    ISO 14001

  • SGS System Certification

    ISO 45001

  • EC1 Plus Very Low Emission

    EC 1 PLUS

  • Marine Wheel

    Marine Approved

  • Marine Ensign

    Marine Approved

STOPGAP P141 AREAS OF USE

STOPGAP P141 is recommended for use over non-absorbent surfaces such as ceramic tiles, treated power floated concrete and STOPGAP waterproof surface membranes. STOPGAP P141 is also recommended prior to the application of STOPGAP 600 over non-absorbent surfaces when applied at thicknesses greater than 20mm.

It is suitable for use over normal underfloor heating and is pigmented yellow for visual control of coverage uniformity.

Videos

How to apply Stopgap P141 - Primer for non -absorbent substrates

STOPGAP P141 is an acrylic primer designed to promote adhesion and application characteristics of STOPGAP smoothing compounds to non-absorbent subfloors. STOPGAP P141 contains recycled uPVC pulver that dries to a hard, textured surface to enhance bond performance. STOPGAP P141 is recommended for use over non-absorbent surfaces such as ceramic tiles, treated power floated concrete and STOPGAP waterproof surface membranes. STOPGAP P141 is also recommended prior to the application of STOPGAP 600 over non-absorbent surfaces when applied at thicknesses greater than 20mm. It is suitable for use over normal underfloor heating and is pigmented yellow for visual control of coverage uniformity.

Need help?

Should you require further information or advice regarding any F. Ball products, please contact the F. Ball technical service team on +44(0)1538 361633 or by e-mail: technical@f-ball.co.uk For the latest information on adhesive recommendations, please refer to the F. Ball Recommended Adhesives Guide

You may also be interested in

High-performance, one-coat waterproof surface membrane

Water-mix base compound for raising floor levels

Surface reinforcement system