Carpet & Textile Flooring Adhesives

Styccobond F40

High Tack Dual Bond Adhesive

STYCCOBOND F40 is a solvent-free synthetic polymer emulsion adhesive, developed to provide a peelable bond for release underlays. It can also be used as a permanent or release bond adhesive when fixing carpets. It is water based and dries to form a transparent, permanently tacky coating. The type of bond achieved is dependent on when the floorcovering is laid into the adhesive.

Laying the floorcovering into the adhesive once it has dried enables the underlay or carpet to be lifted when required, without significant damage to either the floorcovering or subfloor. Laying the floorcovering into wet adhesive gives a permanent bond. It is suitable for use over normal underfloor heating installations.

STYCCOBOND F40 is tested to the standards of the International Marine Organisation and approved for use in marine floor installations.

  • 40 mins drying time

    40 mins drying time

  • Use over UFH Systems

    Use over UFH Systems

  • Provides a quick peelable release option for carpet and underlay systems
  • Suitable with underfloor heating
  • Solvent-free
  • Approved for marine use

Coverage:

5.4m² per litre with a 1.5mm x 5mm trowel

  • SGS System Certification

    ISO 9001

  • SGS System Certification

    ISO 14001

  • SGS System Certification

    ISO 45001

  • EC1 Plus Very Low Emission

    EC1 PLUS

  • Marine Wheel

    Marine Approved

  • Marine Ensign

    Marine Approved

STYCCOBOND F40 AREAS OF USE

STYCCOBOND F40 can be used for securing a wide range of carpets which include those with felt, secondary, unitary and many other backings. It is also suitable for fixing certain release underlays which have been specifically developed for release bonding. See the F. Ball Recommended Adhesives Guide for details of specific floorcoverings.

STYCCOBOND F40 can be applied to STOPGAP smoothing compounds, structurally sound, smooth, dry subfloors of concrete and sand/cement screed, plywood, flooring grade chipboard and hardboard. Sound flooring grade asphalt must be skimmed with a minimum of 3mm of the appropriate STOPGAP smoothing compound.

STYCCOBOND F40 can be applied directly to non-absorbent subfloors such as epoxy resin STOPGAP waterproof surface membranes, Corrosion Treated Steel, Terrazzo, and Granolithic Tiles.

Videos

How to apply Styccobond F40 - High Tack Flooring Adhesive

STYCCOBOND F40 is a solvent free synthetic polymer emulsion adhesive, developed to provide a peelable bond for release underlays. It can also be used as a permanent or release bond adhesive when fixing carpets. It is water based and dries to form a transparent, permanently tacky coating. The type of bond achieved is dependent on when the floorcovering is laid into the adhesive.

 

F. Ball Recommended Adhesives Guide (RAG®)

Using this search facility you will be able to identify the latest recommendations for the most appropriate adhesives to use with over 6,000 brand name floorcoverings from over 200 leading international manufacturers.

Need help?

Should you require further information or advice regarding any F. Ball products, please contact the F. Ball technical service team on +44(0)1538 361633 or by e-mail: technical@f-ball.co.uk For the latest information on adhesive recommendations, please refer to the F. Ball Recommended Adhesives Guide

You may also be interested in

A water based textile flooring adhesive with high bond strength.

Fibre-modified smoothing compound for flexible substrates

Flexible cement based primer