This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
The Tramex CMEX5 Kit is used to determine the moisture content in concrete, sand/cement screeds, gypsum and timber.
Tramex CMEX5 Overview Data sheets and Downloads
TRAMEX CMEX5 BASIS OF TEST
The Tramex Concrete Moisture Encounter X5 – CMEX5 is an instant, precise, digital, non-destructive moisture meter for measuring moisture content % in concrete floors and slabs using Gravimetric testing as a baseline. The CMEX5 detects and evaluates the moisture conditions within the slab or screed by measuring the electrical impedance.
A low frequency electronic signal is transmitted into the material under test via the electrodes in the base of the instrument. The CMEX5 determines the strength of the current and converts this to a moisture content value for concrete slabs and a comparative value for other cementitious floor screeds, displayed on a large clear digital dial.
The CMEX5 provides instant and precise measurements of the moisture content within target areas with a reading range between 0 – 6.9%. For concrete and other such cementitious substrates, the meter provides Carbide Method (CM) equivalent readings alongside comparative readings as per ASTM F2659. The CM measuring range for concrete is 0 – 4.3 while the CM measuring range for Anhydrite is 0-2.7.
Need help?
Should you require further information or advice regarding any F. Ball products, please contact the F. Ball technical service team on +44(0)1538 361633 or by e-mail: technical@f-ball.co.uk For the latest information on adhesive recommendations, please refer to the F. Ball Recommended Adhesives Guide
